SetCoat® (AquaBond™) is a product that was designed specifically to work as a basecoat for all your decorative finishing work with Aquacreme™ or AquaGlaze®. It is an excellent furniture refinishing product as well, as you do not have a strip off the old paint. The material has superb bonding and sealing qualities. SetCoat® material is available in off white, white (which can be tinted with FauxCreme®Color) black, 6 metallic colors and 13 custom colors. SetCoat® is the recommended sub-straight for producing classic  decorative finishes. It allows for the slow drying of AquaCreme™ , AquaGlaze® and other materials in the Aqua™ System.


"Royal Taupe" SetCoat®
with Dutch Metals™ Stencil

 In addition, the material may be used for both interior and exterior applications. Unlike common latex paints, the high grade, proprietary resin used in the manufacturing of SetCoat® allows the material to be hand rubbed to a satin patina, or wet sanded to a feather edge. Amazingly, SetCoat® is low in VOC content and friendly to the environment. 

SetCoat® is excellent for furniture and refinishing mica. Thoroughly clean the  old surface before applying the SetCoat® material (For cabinets, furniture, and mica finishes, sand the old surface with 220 grit roll, or spray. For second or multiple coats, allow the SetCoat® two coats.) If the SetCoat® is sprayed, it may be thinned with water if desired, but it is not necessary with most spray painting equipment. For roll-on applications, use Aqua™ fine quality sponge rollers. Finish roll in one direction, especially with metallic SetCoat®™. For brush applications, use a fine quality brush made for water base material. Finish brush in one direction with light brush pressure.

Available in a wide selection of colors, metallics, as well as a tinting base.

Covers Approximately 400 sq ft per gallon

Sold in quarts and gallons.